MIKRON A 35

•  
  Numéro de référence 1058-24159

  Année de construction 1991

  Heures de fonctionnement non renseigné

• Offreur

  EMUK GmbH Werkzeugmaschinen
  Siemensstraße 24a
  76316 Malsch

  Germany

  

• Catégorie principale

  Machines pour le travail du métal

• Catégorie

  Machines à tailler les engrenages

• Type de machine

  Machines à tailler les engrenages

• Genre de machine

  Machines à tailler les engrenages verticaux

• Fabricant

  MIKRON

• Données techniques

  weight of the machine ca.

  ca. 6 t

• Description

  The design of the basic machine is characterised by the following features:
  
  - horizontal position of the workpiece spindle; vertical position of the
  milling spindle or milling head of the milling head
  - The workpiece is held between the workpiece headstock (left) and the
  tailstock (right).
  - the radial slide is mounted on the base (X-axis)
  - the axial slide moves on the radial slide (Z-axis)
  - the shift milling head is equipped with an automatic angle adjustment
  (A-axis); the shift slide (Y-axis) moves diagonally to the workpiece diameter
  - CNC controlled
  - IBH control
  - loading device
  - Many accessories
  
  Technical data:
  
  - largest milling module with hobs according to DIN 8002: 4.5 mm
  - largest milling module for high-performance milling: 3.0 mm
  - Number of teeth: 2 - 999
  - max. workpiece diameter for manual loading: 200 mm
  - max. workpiece diameter for automatic loading: 150 mm
  - maximum workpiece length: 400 mm
  - largest / smallest milling cutter diameter: 102/40 mm
  - maximum cutter length: 230 mm
  - largest / smallest milling arbor diameter (standard): 32/16 mm
  - Axial slide path = largest milling length Z-axis: 300 mm
  - Radial slide path X-axis: 140 mm
  - Milling cutter shift path Y-axis: 100 mm
  - Milling stock path W-axis: 420 mm
  - Swivelling angle of shift milling head (left/right) A-axis: 50°/60°
  
  Milling coordinates:
  
  - Z-axis: 100 - 400 mm
  - X-axis: 1ß0 - 150 mm
  - Y-axis (end face of milling spindle): 50 - 230 mm
  - W-axis (face of tailstock spindle): 165 - 585 mm
  - Milling cutter speed range standard B-axis: 0 - 1500 rpm
  - Workpiece speed C-axis: 0 - 350 rpm
  
  Feed speeds:
  
  - X-axis: 3500 mm/min
  - Z-axis: 3500 mm/min
  - Y-axis: 4000 mm/min
  - W-axis: 5500 mm/min
  - V-axis (gantry loader): 80000 mm/min
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• État

  Utilisé